|
FRW Industries
Order Service Dept
PO Box 880
Chanhassen, MN 55317
Phone: (800) 442-7575
Fax: (952) 927-9224
sales@frwindustries.com |
|
|
Taps™ POLISHING GRANULES
Material Safety Data Sheet
|
I.
PRODUCT INFORMATION |
|
Trade Name: |
Taps™ Brand Polishing Granules |
|
Name and/or Family Description: |
Molecular Sieve for Odor Control |
|
II. HAZARDOUS
INGREDIENTS |
|
Chemical Names: |
NA |
|
CAS Numbers: |
NA |
|
%: |
NA |
|
Exposure Limits in Air (units): |
NA |
|
May contain Free Silica |
|
III. CHEMICAL &
PHYSICAL PROPERTIES |
|
Vapor Density (Air=1): |
NA |
|
Specific Gravity: |
2.0-2.4 |
|
Solubility in Water: |
0 |
|
Vapor Pressure, mmHg @ 20°C: |
0 |
|
pH: |
NA |
|
Appearance & Odor: |
Green, Granular, Odorless Solid |
|
Melting Point or Range °F: |
NA |
|
Boiling Point or Range °F: |
NA |
|
Evaporation Rate (BuAcetate=1): |
NA |
|
VOC (EPA Method 24): |
0 |
|
IV. SHIPPING
REGULATIONS |
|
DOT Proper Shipping Name: |
NA |
|
DOT Hazard Class: |
NA |
|
DOT ID Number: |
NA |
|
DOT Hazardous Substance: |
NA |
|
V. FLAMMABILITY &
EXPLOSIVE PROPERTIES |
|
Flash Point °F: |
NA |
|
Auto Ignition Temperature °F: |
NA |
|
Flammability Limits in Air, Volume %: |
LEL (Lower) NA |
UEL (Upper) NA |
|
Fire Extinguishing Materials: |
NA |
|
Special Fire Fighting Procedures: |
None |
|
Unusual Fire & Explosion Hazards: |
None |
|
Hazardous Products Formed by Fire: |
None |
|
VI. HEALTH HAZARD
INFORMATION |
|
Symptoms of Overexposure
(For each potential route of exposure) |
|
Inhalation: |
Overexposure to dust may irritate the
nasal passage |
|
Eyes: |
May cause eye irritation similar to dust |
|
Skin: |
Contact with skins has no effect |
|
Absorbed Through Skin: |
None |
|
Swallowed: |
None |
|
Health Effects or Risks From Exposure |
|
Acute: |
No acute effects to health known
Not Toxic |
|
Chronic: |
Prolonged exposure to respirable silica
may cause health risks |
|
First Aid Emergency Procedures |
|
Eye Contact: |
Flush with water |
|
Skin Contact: |
None |
|
Inhalation: |
None |
|
Suspected Cancer Agent |
|
No - The product ingredients are not
found in the following lists:
OSHA - NTP - IRAC |
|
Medical Conditions Aggravated By Exposure:
None |
|
VII. REACTIVITY
DATA |
|
Stability: |
Stable |
|
Conditions to Avoid: |
NA |
|
Incompatibility (materials to avoid): |
NA |
|
Hazardous decomposition products
(including combustion products): |
None |
|
Hazardous Polymerization: |
Will not occur |
|
VIII. SPILL, LEAK
& DISPOSAL PROCEDURES |
|
Spill Response Procedures: (include
employee protection measures) |
No special procedures required |
|
Preparing Waste for Disposal: (container
types, neutralization, etc.) |
No special procedures required |
|
Recommended Methods of Disposal: |
Dispose of all wastes in accordance with
Federal, State & Local regulations |
|
IX. SPECIAL
HANDLING INFORMATION |
|
Ventilation & Engineering Controls: |
No Special Requirements |
|
Respiratory Protection (type): |
NIOSH/MSHA approved dust mask
(TC-21C-132) |
|
Eye Protection: |
None required |
|
Gloves (specify material): |
None required |
|
Other Clothing & Equipment: |
No special requirements |
|
Work Practices, Hygienic Practices: |
No special requirements |
|
Other Handling & Storage: |
No special requirements |
|
Protective measures during maintenance
of contaminated equipment: NA |
|
X. PREPARATION
INFORMATION |
|
Revision Date: |
April 2004 |
|
|
